8 zones hot runner controller


AST 300S series hot runner systems controller conform to the international standard, could compatible with any controller, such as DME, HUSKY, ARICO hot runner controller and so on. All the technical data is the same as the international standard.Of course, we could provide ODM&OEM services, because we have engineers to serve you. KT-300S compared with the brand hot runner temperature controller.jpg Don't worry. We will test each controller card strictly. When we produce hot runner controller according to your requirement, Test again before sending to you.We promise !!!
 
11.jpghot runner controller test
 Please contact me, Thanks in advance.
 Alisa Huang
Wechat/Whatsapp/Mobile:+86 17601440614
 Mail:alisa@kylinsz.com or alisakylin@gmail.com
Website:www.astcontrols.com



评论

发表评论

此博客中的热门博文

图片
300S series hot runner controller card conform to the international standard, could compatible with other brands, such as Husky, Yudo, DME, ARICO and so on. Of course, you maybe have the supplier at present so I could provide some details about 300S hot runner controller card, then you could compare with yours.             (1) 300S hot runner controller cards Internal structure (2)300S hot runner controller cards----shipping standard We have added a blue protective case, which prevents the components from falling off during use, then extended service life, In other words, it will help you save cost. (3) 300S hot runner controller cards----display part (4)SONGLE RELAY        SLA-05VDC-SL-C_Datasheet you could see the file to know SLA-05VDC-SL-A data (5) Transformer （6）cooling system Behind the card, there is the cooling system, help the controller card to cool during use period. Of course, we still add a cooli...
阅读全文
图片
                Analysis of Common Problems in Hot Runner 1. what is the reason of temperature instability? 1) The quality of hot runner temperature controller is too bad 2) The connection of control cable is loose 3) hot runner and mold contact too much, heat loss is serious 4) The thermocouple is crushed 2. What causes of the actual temperature and temperature control shows the temperature of the error analysis of what causes? 1) thermocouple of hot runner temperature controller and hot runner  is inconsistent, that is, "J" "K" does not meet 2) The temperature unit of hot runner controller is tuned to Fahrenheit 3) two zones of thermocouple cross-exchange, resulting in temperature failure 4) The thermocouple wire is crushed 5) Hot runner temperature controller appears other failures 3. What reason of the gate at the cold glue too fast? 1) The cooling water is too close and too fast 2) Hot runner heat los...
阅读全文